Septic Tank Replacement

Septic system installation work by Digger Dave in Northwest Missouri

Septic Tank Replacement in Northwest Missouri

Cracked septic tank? Deteriorated tank? Failed inspection? If the tank needs replaced, that doesn’t automatically mean you need an entirely new septic system.

Digger Dave replaces septic tanks throughout Northwest Missouri and the Kansas City area. We’ll help determine what needs replaced, what can stay, and what it will take to get the system back in service.

Does My Septic Tank Need Replaced?

Septic tanks are buried underground and expected to remain watertight while handling wastewater year after year. Eventually, tanks or their components can deteriorate, become damaged or no longer be suitable for continued use.

Reasons a septic tank may need replacement can include:

  • Cracked or structurally damaged tank
  • Deteriorated concrete
  • Leaking or non-watertight tank
  • Damaged inlet or outlet area
  • Unsafe or deteriorated tank condition
  • Tank problems discovered during an inspection
  • An older tank that isn’t suitable for a planned system repair or replacement
  • A tank that needs to be upgraded as part of a larger septic project

Replacing the Tank Doesn’t Always Mean Replacing the Drain Field

A septic system is made up of multiple components. The tank is only one part of it.

If the septic tank has failed but the rest of the system is functioning properly and remains suitable for use, it may be possible to address the tank without replacing the entire wastewater system.

On the other hand, if the tank problem is only one part of a larger failing system, it makes sense to understand the entire situation before spending money on one component.

Digger Dave can help determine the appropriate scope instead of automatically assuming everything needs replaced.

Signs of a Damaged Septic Tank

A tank problem isn’t always obvious from the surface. In some cases, the problem is discovered during pumping, inspection or other septic work.

Possible warning signs can include:

  • Visible damage discovered during service or inspection
  • Wastewater leaking from the tank area
  • Groundwater entering the tank
  • Wet ground around the tank
  • Recurring problems with tank access or components
  • Structural deterioration
  • Problems at the inlet or outlet
  • Concerns about a buried tank or lid becoming unsafe

These symptoms can also overlap with other septic problems, so the goal is to determine what is actually happening before deciding on replacement.

Cracked or Leaking Septic Tank

A septic tank is intended to contain and treat wastewater before liquid moves to the next part of the onsite wastewater system.

A structurally damaged or leaking tank can interfere with proper system operation and may allow wastewater out or unwanted groundwater into the system.

The appropriate repair depends on the type and extent of the damage. When the tank itself is no longer suitable for continued use, replacement may be the practical solution.

Septic Tank Failed a Home Inspection?

If you’re buying or selling a home and the septic inspection identifies a tank problem, the next question is usually: What will it take to fix it?

A problem with the tank doesn’t necessarily mean the drain field has failed too.

Digger Dave can help determine whether the issue involves the tank alone or whether additional septic work needs to be considered.

If you already have an inspection report, send it over when you contact us.

Can Just the Septic Tank Be Replaced?

In some situations, yes.

If the disposal portion of the system remains usable and the project requirements allow it, the work may be focused on replacing the sewage tank and reconnecting the appropriate system components.

If there are also problems with the drain field, pumps, piping or other components, it may make more sense to address those issues as part of the same project.

We’d rather determine what actually needs replaced than sell you an entire septic system when the entire system isn’t the problem.

What Happens During Septic Tank Replacement?

The exact process depends on the property and existing system, but a tank replacement generally involves several basic steps.

  1. Determine what’s wrong. Confirm that the tank itself needs replacement and identify any other obvious system concerns.
  2. Determine project requirements. Tank size, system configuration and applicable permitting requirements need to be considered.
  3. Prepare the existing system. The tank may need to be pumped and the work area made accessible.
  4. Excavate the existing tank. Existing piping and nearby components are exposed as necessary.
  5. Install the replacement tank. The new tank is properly set and connected to the onsite wastewater system.
  6. Complete required connections and access. Inlet, outlet, risers and other applicable components are installed as required.
  7. Backfill and finish the site. The excavation is properly backfilled and the disturbed area is left ready for final grading or restoration.

What Size Septic Tank Do I Need?

The correct tank isn’t simply chosen by matching whatever happens to be buried there now.

Tank sizing and configuration can depend on the property, wastewater system, number of bedrooms or design flow, system type and applicable requirements.

If the existing tank is being replaced, we’ll determine what is appropriate for the project rather than assuming the old tank is automatically the right size or configuration.

Septic Tank Replacement & Pump Systems

Some onsite wastewater systems use more than a basic septic tank and gravity outlet.

Pump tanks, dosing chambers, aerobic treatment units and advanced septic systems can include pumps, floats, alarms, controls and other components that need to work together.

If your tank replacement is part of a pumped or advanced system, Digger Dave can evaluate the project as a complete wastewater system rather than treating the tank as an isolated component.

What Happens to the Old Septic Tank?

An unused septic tank shouldn’t simply be forgotten underground.

The appropriate abandonment or removal method depends on the project and applicable requirements. The goal is to leave the old tank in a condition that doesn’t create a future safety hazard.

If an old tank is being abandoned as part of a replacement project, we’ll account for that work as part of the overall plan.

Do I Need a Permit to Replace a Septic Tank?

Septic tank replacement is considered significant work on an onsite wastewater system, and permitting or other requirements can apply depending on the property and local jurisdiction.

Requirements aren’t identical everywhere in Northwest Missouri, so the appropriate process should be determined for the specific property before work begins.

Digger Dave can help determine what needs to happen for the project instead of leaving you to figure out the septic construction process on your own.

Tank Problem or Whole Septic System Problem?

This is the important question.

If the tank is damaged but the rest of the system is functioning properly, replacing only what needs replaced may make sense.

If the property also has a failed drain field, repeated backups, surfacing sewage or other major problems, simply installing a new tank may not solve the underlying issue.

Start with the problem you know about. Digger Dave can help determine how far the repair actually needs to go.

Septic Tank Replacement Throughout Northwest Missouri

Digger Dave provides septic tank replacement and septic system repair throughout Northwest Missouri and the Kansas City area, including the Kansas City Northland and communities throughout our broader service area.

If another contractor, pumping company or inspector has already told you the tank needs replaced, send us whatever information you have. Photos, inspection reports and existing septic records can all be useful.

Septic Tank Replacement FAQs

Can you replace just the septic tank?

In some situations, yes. If the rest of the onsite wastewater system remains usable and the project requirements allow it, the tank may be replaced without replacing the entire drain field.

Does a cracked septic tank have to be replaced?

It depends on the type, location and extent of the damage. A structurally unsound or non-watertight tank may require replacement rather than a minor repair.

Does replacing the septic tank mean I need new laterals?

Not automatically. The condition and suitability of the existing disposal system should be considered separately from the condition of the tank.

Can a septic tank be replaced without digging up the whole yard?

Tank replacement requires excavation around the tank and necessary piping, but it does not automatically mean the entire drain field or property has to be excavated.

How do I know what size replacement septic tank I need?

The appropriate size and configuration depend on the property, wastewater flow, system type and applicable requirements. The replacement should be selected for the actual project rather than simply copying an unsuitable existing tank.

What happens to the old septic tank?

An unused tank should be properly removed or abandoned so it doesn’t become a future safety hazard. The appropriate method depends on the project and applicable requirements.

Do I need a whole new septic system?

Not necessarily. If the tank is the only failed component, the project may be limited to the tank and associated connections. If the drain field or other components are also failing, additional repair or replacement may be necessary.

Who replaces septic tanks in Northwest Missouri?

Call Digger Dave. We handle septic tank replacement and can help determine whether you need a tank-only project or whether another part of the septic system also needs attention.

Need a Septic Tank Replaced?

Whether the tank is cracked, deteriorated, leaking or failed an inspection, start with Digger Dave. We’ll help determine what actually needs replaced and get the project moving.